Skip to content

How to Replace RV Awning Fabric on Dometic Electric Awning

Are you an RV enthusiast looking to replace the fabric on your Dometic electric awning?

If so, you’ve come to the right place!

In this comprehensive guide, we will walk you through the step-by-step process of replacing the awning fabric on your Dometic electric awning.

With our easy-to-follow instructions, you’ll be able to tackle this project with confidence and restore the beauty and functionality of your RV’s awning.

So let’s dive in and learn how to replace RV awning fabric on a Dometic electric awning!

How to Replace RV Awning Fabric on Dometic Electric Awning: A Step-by-Step Guide

Step 1: Gather the necessary tools and materials

Before you begin replacing the awning fabric, make sure you have all the required tools and materials on hand.

Here’s a checklist to help you get started:

  • Replacement fabric (specifically designed for Dometic electric awnings)
  • Screwdriver
  • Pliers
  • Tape measure
  • Scissors
  • Safety goggles
  • Gloves
  • Cleaning solution and a soft brush
  • Rags or towels

Step 2: Safely remove the old awning fabric

To begin the replacement process, you need to remove the old fabric from your Dometic electric awning.

Follow these steps:

  1. Fully extend the awning to its maximum length.
  2. Locate the screws that secure the fabric to the roller tube.
  3. Unscrew the screws using a screwdriver and keep them in a safe place.
  4. Carefully detach the fabric from the roller tube by sliding it out of the slot.

Step 3: Prepare the new awning fabric

Now that you have removed the old fabric, it’s time to prepare the new fabric for installation.

Here’s what you need to do:

  1. Lay the new fabric flat on a clean surface.
  2. Measure the length of the old fabric and use the tape measure to mark the same length on the new fabric.
  3. Cut the new fabric along the marked line using scissors.

Step 4: Attach the new awning fabric to the roller tube

With the new fabric ready, it’s time to attach it to the roller tube of your Dometic electric awning.

Follow these steps:

  1. Insert the fabric into the slot on the roller tube.
  2. Make sure the fabric is centered and aligned properly.
  3. Secure the fabric to the roller tube using the screws you removed earlier. Tighten the screws with a screwdriver.

Step 5: Test the awning and make adjustments if necessary

After attaching the new fabric, it’s essential to test the awning and ensure everything is functioning correctly.

Here’s what you should do:

  1. Carefully retract and extend the awning a few times to ensure smooth operation.
  2. Observe the fabric for any wrinkles or misalignment.
  3. If necessary, make adjustments by loosening the screws and repositioning the fabric. Once adjusted, tighten the screws again.

Step 6: Clean and maintain the awning fabric

Now that you have successfully replaced the fabric on your Dometic electric awning, it’s crucial to keep it clean and well-maintained.

Follow these tips for optimal awning care:

  1. Regularly clean the fabric with a mild cleaning solution and a soft brush.
  2. Rinse off any dirt or debris with water and allow the fabric to dry completely.
  3. Avoid using harsh chemicals or abrasive materials that can damage the fabric.
  4. Check the fabric for any signs of wear or damage and repair or replace as needed.

Frequently Asked Questions (FAQs)

How often should I replace the fabric on my RV awning?

It’s recommended to replace the fabric on your RV awning every 5-7 years or as needed. Regular inspection of the fabric’s condition will help determine if replacement is necessary.

Can I replace the awning fabric myself, or should I hire a professional?

While it’s possible to replace the awning fabric yourself, hiring a professional can ensure the job is done correctly and save you time and effort. Consider your skills and comfort level before deciding.

Where can I purchase replacement fabric for my Dometic electric awning?

Replacement fabric for Dometic electric awnings can be purchased from RV supply stores, online retailers, or directly from the manufacturer. Ensure you select the correct size and model for your awning.

Are there any precautions I should take while replacing the awning fabric?

Yes, safety should always be a priority. Wear safety goggles and gloves to protect your eyes and hands during the replacement process. Use caution when handling tools and climbing ladders.

Can I use any type of fabric for my RV awning?

It’s essential to use fabric specifically designed for RV awnings to ensure proper fit and durability. Using the wrong fabric may lead to issues with installation and performance.

How long does it take to replace the fabric on a Dometic electric awning?

The time required to replace the fabric can vary depending on your experience level and the specific awning model. On average, it may take a few hours to complete the replacement process.


Congratulations! You’ve learned how to replace RV awning fabric on a Dometic electric awning.

By following the step-by-step guide provided, you can confidently undertake this project and restore the functionality and appearance of your RV’s awning.

Remember to prioritize safety and maintenance to ensure the longevity of your awning fabric.

Now go ahead and enjoy the outdoors with your newly replaced awning!