Skip to content

How to Replace RV Floor

Whether you’re a seasoned RV owner or a newbie looking to tackle a DIY project, this article will provide you with all the information you need to successfully replace the floor in your recreational vehicle.

We’ll cover the step-by-step process, essential tools and materials, common challenges, and expert tips to ensure a smooth and successful floor replacement.

How to Replace RV Floor: Step-by-Step Guide

Step 1: Prepare the Work Area

Before you dive into replacing the RV floor, it’s crucial to prepare the work area properly.

Here’s what you need to do:

  1. Remove all furniture and appliances from the RV to create a clear workspace.
  2. Take out the existing flooring materials, including carpets, vinyl, or laminate.
  3. Inspect the subfloor for any signs of damage or rot. Replace any damaged sections as necessary.

Step 2: Gather the Essential Tools and Materials

To replace the RV floor effectively, you’ll need the following tools and materials:


  • Circular saw
  • Jigsaw
  • Pry bar
  • Hammer
  • Screwdriver
  • Measuring tape
  • Safety goggles
  • Gloves


  • Plywood sheets
  • Underlayment
  • Adhesive
  • Nails or screws
  • Flooring material of your choice (vinyl, laminate, etc.)
  • Trim pieces
  • Sealant

Step 3: Remove the Old Flooring

Now that you have your tools and materials ready, it’s time to remove the old flooring.

Follow these steps:

  1. Start at one corner of the RV and use a pry bar or screwdriver to lift the old flooring.
  2. Work your way across the floor, removing the flooring piece by piece.
  3. Be careful not to damage the subfloor during the removal process.

Step 4: Prepare the Subfloor

With the old flooring removed, it’s essential to prepare the subfloor before installing the new one.

Here’s what you need to do:

  1. Clean the subfloor thoroughly to remove any debris or adhesive residue.
  2. Check for any remaining damage or rot. Replace or repair the subfloor as needed.
  3. Measure the dimensions of the RV floor to determine the amount of plywood needed.

Step 5: Cut and Install the Plywood

Now it’s time to cut and install the plywood sheets that will serve as the new subfloor.

Follow these steps:

  1. Measure and mark the plywood sheets according to the dimensions of the RV floor.
  2. Use a circular saw or jigsaw to cut the plywood along the marked lines.
  3. Lay the plywood sheets on the prepared subfloor, ensuring a snug fit.
  4. Secure the plywood to the subfloor using nails or screws, ensuring a sturdy foundation.

Step 6: Install the Underlayment

Once the plywood is in place, it’s crucial to install an underlayment to provide insulation and support for the flooring material.

Follow these steps:

  1. Roll out the underlayment material over the plywood, covering the entire floor area.
  2. Trim the excess underlayment using a utility knife.
  3. Ensure that the underlayment is smooth and free from wrinkles or overlaps.

Step 7: Install the New Flooring

Now comes the exciting part – installing the new flooring.

Depending on your preferences, you can choose from a variety of flooring materials such as vinyl, laminate, or carpet.

Here’s how to proceed:

  1. Start at one corner of the RV and lay the first piece of flooring according to the manufacturer’s instructions.
  2. Continue laying the flooring piece by piece, ensuring a tight fit between each section.
  3. Use adhesive or interlocking mechanisms as recommended by the flooring manufacturer.
  4. Trim the edges as necessary to ensure a clean and seamless finish.

Step 8: Install Trim and Apply Sealant

To complete the RV floor replacement, you need to install trim pieces and apply sealant.

Follow these final steps:

  1. Install trim pieces along the edges of the floor to cover any gaps and provide a finished look.
  2. Use a nail gun or adhesive to secure the trim in place.
  3. Apply a bead of sealant along the edges and seams of the flooring to prevent moisture penetration.

FAQs (Frequently Asked Questions)

How long does it take to replace the RV floor?

Replacing the RV floor can be a time-consuming process, depending on the size of your RV and the complexity of the project. On average, it can take anywhere from a few days to a couple of weeks to complete the floor replacement.

Can I replace the RV floor myself, or should I hire a professional?

While replacing the RV floor is a manageable DIY project, it does require some level of skill and knowledge. If you have experience with similar tasks and feel confident in your abilities, you can tackle it yourself. However, if you’re unsure or uncomfortable with the process, it’s advisable to hire a professional to ensure a successful outcome.

What type of flooring material is best for an RV?

The choice of flooring material for your RV depends on your preferences and needs. Vinyl and laminate are popular options due to their durability, ease of maintenance, and resistance to moisture. However, some RV owners prefer carpet for its comfort and insulation properties. Consider your lifestyle, budget, and specific requirements before making a decision.

How can I prevent future floor damage in my RV?

To prevent future floor damage in your RV, it’s essential to take proactive measures. Here are a few tips:

  • Keep the RV clean and free from moisture.
  • Place mats or rugs at the entry points to trap dirt and debris.
  • Avoid excessive weight or impact on the flooring.
  • Regularly inspect the floor for any signs of damage or wear.

Are there any specific maintenance requirements for RV flooring?

The maintenance requirements for RV flooring depend on the type of material you choose. Generally, regular cleaning with a mild detergent and warm water is sufficient to keep the floor in good condition. Follow the manufacturer’s recommendations for maintenance and avoid using abrasive cleaners or harsh chemicals.

Can I install radiant floor heating in my RV?

While it’s technically possible to install radiant floor heating in an RV, it’s not a common practice due to space and power constraints. Radiant floor heating systems require a significant amount of power and may not be suitable for an RV’s electrical capacity. It’s recommended to consult with a professional if you’re considering this option.


Replacing the floor in your RV can breathe new life into your vehicle and enhance your camping experience.

By following the step-by-step guide outlined in this article, you’ll be well-equipped to take on the project with confidence.

Remember to prepare the work area, gather the necessary tools and materials, and proceed systematically through each step.

With proper planning and attention to detail, you’ll have a brand new RV floor that you can enjoy for years to come.